This PML pan fits GM and Chevrolet 1997 and newer trucks, SUVs, and vans with the 4L80E and 4L85E transmission. It also fits the Hummer H1. Some examples of vehicles that this pan will fit are:

• Hummer H1, 1997-2005 with 5.7, 6.5 diesel engines
• C2500 1997-1999 with 454, 6.5 diesel engines
• K2500 1997-1999 with 454, 6.5 diesel engines
• C3500 1997-1999 with 454, 6.5 diesel engines
• K3500 1997-1999 with 454, 6.5 diesel engines
• Savana, 1997 and newer, 6.0, 6.5 & Duramax diesel engines

Some models of Sierra and Silverado can use this pan but may require modification of the heat shield. Please check carefully for clearance for a deeper pan.

Earlier model vehicles will need a pan without a slant to avoid interference with transmission internals. See this extra capacity PML pan for GM 4L80E/4L85E transmissions on early model trucks.

The pan has a boss that can be machined for a temperature sensor.

Hummer H1 PML Transmission Pan Install

PML GM 4L80 transmission pan installed on a 1997 TD H1 Hummer.

If you have a Hummer, please visit our Hummer page.

Silverado 1500HD PML Transmission Pan Install

This installation is on a 2006 Chevy Silverado 1500HD. The images below show the stock pan and the PML pan. To install the PML pan, the heat shield was removed. During the installation, the transmission mounts were loosened to allow easier access. The pan has the as-cast finish.